Transparent colored self-adhesive film for glass and other non-porous hard surfaces.
It presentrs also with prepared patterns.
Can use for artificial stained-glass windows at home.

Instructions:
1. Measure and cut to size using the gridlines as a guide.
For precise edges, overlap 3-5 mm and trim away excess with a craft knife after fixing.
2. Peel back the backing paper for a few centimeters.
3. Position and apply d-c-fix to one edge.
4. Slowly peel off the backing paper and simultaneously smooth the d-c-fix into place
by hand using a soft cloth or squeegee.
Work from the center outwards to avoid air bubbles.

Incorrectly glued ?
If d-c-fix is incorrectly positioned or there are air bubbles or creases,
then peel it off and reapply.
This applies to solid surfaces.

Width 45 cm (17.72 inch).
Length 1 m (39.37 inch).
We shall summarize the lenght as one scrolled piece from your ordered units (max 15 m).

d-c-fix, Germany

Notes of Violtan.
Samples of film 5x5 cm are scanned above paper with grid for demo of transparency.